You are holding the Sun.
Hold a piece of the Moon.
A square of real lunar terrain, cut from NASA's elevation map and 3D‑printed to order. You choose the place.
printed to order
- Every ridge sits where NASA's Lunar Reconnaissance Orbiter measured it.
- Any place on the Moon: a crater, a sea, a landing site, your own coordinates.
- A 200 or 300 mm plate, or a mosaic of 200 mm tiles. Four filaments. Your words on the edge and the back.
The monarch of the Moon
This is Copernicus.
Terraced walls, a cluster of central peaks and a field of ejecta scars around a 96 km crater.
- Region
- 300 km across
- Scale
- 1 : 1 500 000
- Relief on the plate
- 4.7 km → 9.0 mm
- Finest printed detail
- craters from 1.2 km
Move the Sun.
Relief lives in low light. It is why the Moon looks sharpest along the terminator, and why a MoonPlate reads differently at breakfast and at dusk. Move your pointer over the plate (on a phone, drag sideways across it), or pick a time of day.
Built in layers you can count.
Each plate is printed in 0.12 mm layers; the relief of a Classic takes about 75 of them. Choose one of four filaments: three matte colours and a silk one with a metallic sheen.
Matte grey, the colour of the surface itself.
Honest about height.
At true scale the Moon is too gentle to feel.
The × figure is how much the height is raised. It is shown before you order and printed on the back.
The larger the plate, the smaller the craters it holds.
A bigger plate is the same landscape at a finer scale. That is the real reason to go up a size.
Make it yours.
The front edge carries a title beside the coordinates and the scale. The back carries the plate's figures, the data credit and, if you like, a few words for someone.
Both go with your plate into the studio, where you can change them before you order.
Your plate so far.
- Place
- Copernicus
- Size
- Classic, 200 mm
- Material
- Regolith
- Relief
- 9.0 mm · ×2.9
- Edge
- Copernicus
- Dedication
- None
for you
The studio opens with these choices. Turn the plate, reframe the place, then add it to the cart.
Copernicus · the chart and the plate, drawn around the same centre
Add the chart of your place.
A Moon Atlas poster drawn in the layout of the 1964 Lunar Astronautical Charts. Same centre, same rotation, same title as your plate. It ships as its own item.
- Sheet70 × 50 cm, landscape
- LayoutLAC 1964
- To configurenothing
The chart goes with a single plate; it is not offered with a mosaic yet.
From orbit to your wall.
Fig. 1 · the frame on the Moon
Frame it.
Pick a landscape from the collection or turn the Moon under the frame.
Fig. 2 · the lift
Lift it.
See the plate in its material, choose relief, size and an inscription.
Fig. 3 · the plate
We print it.
Made to order from NASA elevation data, layer by layer.
Nothing on the plate is sculpted.
The terrain comes from SLDEM2015, the elevation model built from the laser altimeter on NASA's Lunar Reconnaissance Orbiter and stereo images from Japan's Kaguya. We cut your square from it and send it to the printer.
MoonPlate began in 2022 as a cement cast of two places: the Apollo 11 landing site and Humboldt crater. Printing lets it be any place.
- Elevation
- SLDEM2015 + LOLA, NASA GSFC
- Ground detail
- about 60 m per sample to 60° N and S, coarser toward the poles
- Projection
- azimuthal equidistant, centred on your place
- Layer height
- 0.12 mm
- Nozzle
- 0.4 mm
- Relief
- 9 mm Classic, 11 mm Large, 13 mm Mosaic
- First MoonPlate
- 2022, cement cast, 192 mm
Before you choose.
Can it really be any place on the Moon?
Yes. Start from one of thirteen framed landscapes, search the named craters, seas, mountains and landing sites, or enter coordinates. In the studio you turn the Moon under a square frame and decide how much of it the plate holds, from a single crater to a whole basin.
What is it made of?
Printed filament: three matte colours and a silk one with a metallic sheen. Bronze is the colour of the silk filament, not metal.
Is the relief exaggerated?
Yes, and we say by how much. At true scale a 4.7 km deep crater is 3 mm on a 200 mm plate, too shallow to cast a shadow. Balanced raises the terrain until it spans 9, 11 or 13 mm depending on size. You can also keep it at true scale. The factor is shown before you order and printed on the back.
How fine is the detail?
A 0.4 mm nozzle draws about 500 lines across a 200 mm plate. With 300 km framed, the smallest crater that prints is 1.2 km wide on a Classic and 0.8 km on a Large; a 2 × 2 mosaic of the same ground holds craters from 0.6 km. The studio shows this figure for the frame you choose.
How does a mosaic work?
Each tile is a 200 mm plate, cut from one height field with the others, so the landscape runs across the seams without a step. Choose 2 to 12 tiles in any shape where every tile touches another along a side: a square, a row, a staircase along a mountain range. You lay them out in the studio.
Does it stand or hang?
Both. The base is flat, and the back has two keyhole slots for a wall.
What is the chart?
An ordinary Moon Atlas poster, 70 × 50 cm, drawn for the place on your plate in the layout of the 1964 Lunar Astronautical Charts. It is added to the order as its own item, beside a single plate.